What did EPA testing find in Los Angeles Department of Water and Power water?
Los Angeles Department of Water and Power found none of the 29 PFAS EPA tested for. EPA’s UCMR 5 program tested this water from Dec 2023 to Sep 2024. Every result was below the lowest amount the lab can measure, which is 2 to 20 parts per trillion depending on the PFAS.
These samples were taken from Dec 2023 to Sep 2024. Los Angeles Department of Water and Power’s newest water-quality report may show different results.
The lab reporting limits for the 29 PFAS range from 2 to 20 ppt. “Not found” means below those limits, not zero.
EPA’s program also tested lithium, which has no EPA drinking-water limit; the results are data for EPA, not a pass or fail. Los Angeles Department of Water and Power’s highest result was 100 µg/L (micrograms per liter), and detected results averaged 58.26 µg/L.
Los Angeles Department of Water and Power also publishes a 2025 water-quality report with its own test results: Los Angeles Department of Water and Power water-quality reports.
Which water system serves your apartment?
A ZIP code can be served by more than one water system, and EPA’s ZIP list does not say which one reaches your building. Your lease, the property manager or your water bill names the utility. This table shows the systems EPA lists for each ZIP where the guide has apartment listings.
| ZIP | Water systems | Listings |
|---|---|---|
| 10020 | 1 | |
| 10475 | 1 | |
| 10724 | 1 | |
| 10855 | 1 | |
| 10968 | 1 | |
| 90024 | Los Angeles Department of Water and Power | 62 |
| 90025 | Los Angeles Department of Water and Power | 1 |
| 90034 | Golden State Water, Culver City; Los Angeles Department of Water and Power | 8 |
| 90048 | Los Angeles Department of Water and Power; Beverly Hills Water Department | 1 |
| 90066 | Golden State Water, Culver City; Los Angeles Department of Water and Power | 3 |
| System | Highest PFAS | Over its limit |
|---|---|---|
| Golden State Water, Culver City | None found | None found |
| Beverly Hills Water Department | None found | None found |
“Over its limit” is Yes when a result was at or above an EPA limit for that PFAS. It says “No limit for it” when the highest PFAS has no EPA limit of its own. EPA judges compliance on a running annual average, not one sample.
How do you check your own water?
- Find your utilityLook for the water line on your lease or ask the property manager. If your ZIP lists several systems, the street address decides.
- Open that utility’s own reportWater systems publish a yearly water-quality report with the results they are required to test, including lead and copper. The links are in the sections above and in the sources.
- Compare with the EPA limitsEPA’s limits for PFOA and PFOS are 4.0 ppt. The tables show the highest result next to the limit for each PFAS that has one.
Short glossary: PFAS are a family of man-made chemicals; ppt is parts per trillion; UCMR 5 is EPA’s fifth round of testing for contaminants it does not yet regulate. EPA’s page on PFAS and drinking water explains the limits and the 2029 deadline.